| GENERAL INFORMATION |
 |
Many products from Sipura and Linksys (which now owns Sipura) are based on the same software and web based user interface as the
Linksys PAP2 device. Because of this you may use the setup instructions for the PAP2 here to
help you configure your device.
Below are listed common products that are very similar to the PAP2 and have basically the same setup:
Linksys - PAP2T
Linksys - SPA-841
Linksys - SPA-1001
Linksys - SPA-2100
Linksys - SPA-2102
Linksys - SPA-3000
Linksys - SPA-3102
Linksys - SPA901
Linksys - SPA921
Linksys - SPA922
Linksys - SPA941
Linksys - SPA942
Linksys - SPA3000
Linksys - SPA9000
Linksys - RT31P2
Linksys - RTP300
Linksys - WRTP54G
Sipura - SPA-841
Sipura - SPA-1000
Sipura - SPA-1001
Sipura - SPA-2000
Sipura - SPA-2002
Sipura - SPA-2100
Sipura - SPA-3000
Setup instructions for the Linksys PAP2 are can be found here, and should help you with
configuring your device.
Other models may also have the same setup, please check the PAP2 setup guide here and see
if the screens look similar. If your device is significantly different you may use the Generic/Other setup
guide here.
|
|
