internet phone service

The VSP736 is a 6 line SIP IP Phone solution from VTech. This device offers stable voice functionality, excellent sound quality and many other features such as PoE (Power Over Ethernet) support, dual gigabit ethernet ports, and the ability to pair with VTech's DECT wireless handsets.

RESOURCES

Website:
Manufacturer Homepage
Product Page

Help / Support
VSP736 Deskset Administrator Manual

Configuring VTech VSP736

Here we will configure the VSP736 through the web interface in order to register to Callcentric to allow you to place and receive calls. The information presented in this guide is based on Version 2.0.3.2 of the VSP736 firmware. If you are running a different firmware version some of menu options and settings may be different.

This guide assumes that your VSP736 has a valid IP address and that you have administrative access to the web interface of the device. If you need assistance logging into the web interface for your VSP736 web administration pages, please refer to the VSP736 Deskset Administrator Manual.

We recommend that you read each step through in its entirety before performing the action(s) indicated within the step.

STEP 1

Logging into your device

Once you have retrieved the IP address of your device and have pointed your web browser to that IP address, you should be greeted by the System Status screen which displays general information about your device; such as the current firmware version, registration status, etc:

From the navigation bar at the top of this page, click on the System link, followed by the subsection (located on the navigation menu on the left hand side) labeled Account 1.

STEP 2

Configuring your Callcentric account

On this page, please use the settings detailed below. Your configuration page should look similar to the screenshot provided at the end of this step:

General Account Settings
Enable Account	enabled/checked
Display Name	You may enter any name on this field
User identifier	This is either the default extension 1777MYCCID OR 1777MYCCIDEXT, where 1777MYCCID is the 1777 number assigned to you by Callcentric and EXT is the three digit extension you are trying to register this UA to. For example: 17770001234101 would register to extension 101 on account 17770001234. You cannot register to your account using only the extension number.
Authentication name	This is either the default extension 1777MYCCID OR 1777MYCCIDEXT, where 1777MYCCID is the 1777 number assigned to you by Callcentric and EXT is the three digit extension you are trying to register this UA to. For example: 17770001234101 would register to extension 101 on account 17770001234. You cannot register to your account using only the extension number.
Authentication password	Enter your extension SIP Password here. Your extension SIP password is the password you created for the extension you are trying to use. You may edit the SIP password you wish to use in by logging into your My Callcentric account and clicking on the Extension menu link and then modifying the appropriate extension.
DTMF method	RTP Event
SIP Server
Server Address	sip.callcentric.net
Registration
Server Address	sip.callcentric.net
Outbound Proxy
Server Address	sip.callcentric.net
Audio
Codec priority 1	G.729
Codec Priority 2	G.711u
Codec Priority 3-5	None
Feature Access Code
Voicemail	*123

Once complete click on the Save button to apply/save your settings.

STEP 3

Checking Registration Status

To ensure that your VSP736 has successfully registered to our service, click on the Status tab on the top menu bar and locate the Account Status section. You should see that the Account that you just configured is now Registered.

STEP 4

That's it! You can now make a phone call.

You can make a test call to 17771234567, or if you are signed up for one of Callcentric's rate plans you can place a call to a traditional landline or mobile phone by dialing either:
1 + the area code and number for calls to the US
Or
011 + the country code, area code, and number for calls worldwide (you may also use 00 instead of 011).