 | |
| STEP 1 |
If you already have Express Talk installed then skip to Step 3. Otherwise when you first run Express Talk an account setup wizard should open automatically. You will want to select the top option which says Yes, I already have a sip account then click Next:
|
| STEP 2 |
You will now see a screen that has four fields that need to be configured. Fill in the fields with the following values(also illustrated in screen shot), Then click the Finish button:
 |
| Field | Setting |
|
| Friendly Display Name | Enter your name in this field |
|
| SIP Account Number (or User Name) | Enter your Callcentric number here (your Callcentric number starts with 1777 and has an additional 7 digits) |
|
| SIP Server (Proxy and Domain) | callcentric.com |
|
| SIP Password | Enter your SIP Password here. Your SIP password is the same password you create when you sign up for you Callcentric account. Optionally you may change it in your preferences (http://www.callcentric.com/faq/29/196) |
|
|
| STEP 3 |
Open NCH Express talk and click the Options button from the main menu as shown below:
|
| STEP 4 |
You should now see a window with various configuration options. On this screen click the Lines tab to reach the following screen:
|
| STEP 5 |
If this is the only and primary account you intend to use with Express Talk then be sure that the drop down box next to Settings for Line is set to Default Line Settings. You will now want to fill in the four fields using the same instructions as mentioned in Step 2:
|
| Field | Setting |
|
| Friendly Display Name | Enter your name in this field |
|
| SIP Account Number (or User Name) | Enter your Callcentric number here (your Callcentric number starts with 1777 and has an additional 7 digits) |
|
| SIP Server (Proxy and Domain) | callcentric.com |
|
| SIP Password | Enter your SIP Password here. Your SIP password is the same password you create when you sign up for you Callcentric account. Optionally you may change it in your preferences (http://www.callcentric.com/faq/29/196) |
|
After you've filled in the values click OK at the bottom of the dialog box to finish configuring your soft phone.
You'll notice now in the log on the bottom of the phone that your Express Talk should be registered:
|
STEP 6
|
That's it! You can now make a phone call.
You can make a test call to 17771234567, or if you are signed up for one of Callcentric's rate plans you
can place a call to a traditional landline or mobile phone by dialing either:
1 + the area code and number for calls to the US
Or
011 + the country code, area code, and number for calls worldwide
(you may also use 00 instead of 011).
|
