Supported devices
ATA Adaptors
IP Phones
Cordless DECT IP Phones
IP PBX Software
Desktop Softphones
Mobile Softphones

Security considerations for Callcentric customers

3CX
3CX Version 6
3CX Version 12
3CXPhone (for Windows)
3CXPhone (Mobile)
Aastra 6753i
Acrobits/Groundwire for iPhone
Android SIP Client
Asterisk 1.4 and 1.2
Asterisk 1.6
Asterisk 1.6.2, 1.8, and 10
Bria Desktop
Bria Mobile
Callcentric Android App
Callcentric iPhone App
Callcentric Softphone
Cisco ATA 186/188
Cisco SPA112/SPA122
CloudTC Glass 1000
CSipSimple
D-Link DVG-1402S
Ekiga
Elastix
freePBX
Gigaset A510 IP
Gigaset C610A IP
Gigaset DX800A
Grandstream DP715/710
Grandstream GXP1450
Grandstream GXP2110
Grandstream GXP2200
Grandstream GXV3140
Grandstream HandyTone 286
Grandstream HandyTone 486
Grandstream HandyTone 702
Innomedia SIP MTA-6328
Jitsi
Linksys PAP2
Linksys SPA3102
LinPhone Desktop
LinPhone Mobile
NCH Axon PBX
NCH Express Talk
Nokia E90
Obihai
OBi100
OBi202
pbx-in-a-flash
pbxnsip
pbxnsip Version 3
PhonerLite
Polycom SoundPoint IP 601
snom 1xx/2xx/3xx
snom 820
snom M9
snom ONE
SFLphone
SJphone
Telco AC-211
trixbox / Elastix / pbx-in-a-flash
Twinkle
Windows Messenger
UTStarcom F3000
X-Lite / X-Pro / eyeBeam
Yealink T32G
Yealink W52P
Yealink T46G
Yeastar MyPBX U100
ZoIPer
ZoIPer Mobile
Zoom 5801
Other Linksys/Sipura products
Generic / Other Device

DID based routing with Asterisk
DID based routing with trixbox / freePBX / Elastix / pbx-in-a-flash
Android SIP Client

GENERAL INFORMATION
Android SIP ClientThis guide will assist you with the general steps needed to configure the native Android SIP client. This guide is based on the native Android SIP Client that is included with Android 4.1.1. We cannot guarantee 100% compatibility with all future Android releases since settings may change. This guide is provided for those who wish to experiment, and probably use, this software. Ideally you will want to use a wifi connection with these features, instead of a 3G connection.

NOTE: Please be aware that: If used over 3G/EDGE then depending on carrier and service plan used, you may be billed for your data usage.


RESOURCES
Websites:
www.android.com

Help / Support:
Google Android Forums


Configuring the native Android SIP Client
We recommend that you read each step through in its entirety before performing the action indicated in the step.
STEP 1 Launching the Android SIP Client
To open the Android SIP Client begin by tapping on the Phone icon in your app drawer.



STEP 2 Navigate to the SIP account details screen
Bring up the Settings menu by tapping on the three dots.



On the Call Settings page scroll down to the Accounts option and tap on it.



From the Internet calling (SIP) accounts screen, tap on Add Account near the bottom.



STEP 3 Configuring your Callcentric account
We will now create a profile and enter the required credentials, such as your Callcentric number, password and SIP server on the SIP account details screen:



SettingValue
UsernameThis is either the default extension 1777MYCCID OR 1777MYCCIDEXT, where 1777MYCCID is the 1777 number assigned to you by Callcentric and EXT is the three digit extension you are trying to register this UA to.

For example: 17770001234101 would register to extension 101 on account 17770001234.

You cannot register to your account using only the extension number.
PasswordEnter your extension SIP Password here. Your extension SIP password is the password you created for the extension you are trying to use. You may edit the SIP password you wish to use in by logging into your My Callcentric account and clicking on the Extension menu link and then modifying the appropriate extension.
Servercallcentric.com

Tap Save after you have entered the above information. Your configuration should look similar to the one shown in the picture below:



STEP 3 That's it! You can now make a phone call.
You can make a test call to 17771234567, or if you are signed up for one of Callcentric's rate plans you can place a call to a traditional landline or mobile phone by dialing either:
1 + the area code and number for calls to the US



Or
011 + the country code, area code, and number for calls worldwide (you may also use 00 instead of 011).

To test inbound calls from Callcentric to your Glass 1000 installation, follow the directions listed in this FAQ.