| What hardware is compatible with Callcentric? |
 |
Callcentric has tested and found the following hardware to be compatible with our service:
PBX Hardware:
Grandstream GXW 4XXX/8XXX
pbxnsip - CS410, v 2.1.2.2292
pbxnsip - CS425, v 2.1.2.2292
U4EA - Fusion 200/400, v
IP Phones
Grandstream - BudgeTone 101, v 1.0.6.7
Grandstream - BudgeTone 102, v 1.0.6.7
Grandstream - BudgeTone 200, v 1.1.0.13
Grandstream - GXP2000, v 1.0.1.9
Grandstream - GXP2020, v 1.1.5.15
Hitachi Cable - Wireless IP-5000 WiFi Phone, v 1.5.3 10
Polycom - SoundPoint IP 301, v 1.5.3
Polycom - SoundPoint IP 501, v 1.5.3
Polycom - SoundPoint IP 601, v 1.5.3
Sipura - SPA-841, v 3.1.4
Snom - 105, v 3.56
Snom - 190, v 3.60i
Snom - 200, v 3.56y
Snom - 220, v 3.56y
Snom - 300, v 5.5
Snom - 320, v 4.0
Snom - 360, v 4.0
Snom - 370, v 7.1.30
ATAs (Analog Telephony Adapters)
Cisco - ATA 186/188, v 3.2.1
D-Link - DVG-1402S, v S4.0S49 - We do NOT recommend this device
Grandstream - HandyTone 286, v 1.0.6.7
Grandstream - HandyTone 386, v 1.0.2.9
Grandstream - HandyTone 486 / 487, v 1.0.6.7
Grandstream - HandyTone 488, v 1.0.2.9
Grandstream - HandyTone 496, v 1.0.2.9
Grandstream - HandyTone 502, v 1.0.0.67
Grandstream - HandyTone 503, v 1.0.0.9
Innomedia - SIP MTA-6328, v 3.0.38
Linksys - PAP2, v 3.1.10(LS)
Linksys - PAP2T, v 3.1.10c
Linksys - SPA-2102, v 3.2.10
Linksys - SPA-3102, v 3.2.10
Linksys - SPA901, v 1.12a
Linksys - SPA921, v 4.1.12
Linksys - SPA922, v 4.1.12
Linksys - SPA941, v 4.1.12
Linksys - SPA942, v 4.1.12
Linksys - SPA962, v 5.2.2(SCb)
Linksys - SPA3000, v 3.1.7
Sipura - SPA-1000, v 2.0.13g
Sipura - SPA-1001, v 3.1.5
Sipura - SPA-2000, v 3.1.5
Sipura - SPA-2002, v 3.1.5
Sipura - SPA-2100, v 3.2.1
Sipura - SPA-3000, v 3.1.5
Sinoco - SGW-2200, v Sinoco/SGW-2200_125_522_1s
Telco Systems - AC-211, v 4.62 US (LDR 14)
The hardware above has been tested with the listed versions. Normally older and newer versions of the firmware listed will work, but we have only tested the versions listed above.
Callcentric subscribers have also had success using the following hardware, although we have not tested them ourselves:
Aastra - 9133i, v 1.4.0
AVM - FRITZ!Box, v 06.03.62
Cisco - 7900 Series Phones, v unknown
DrayTek - Various, v1.1
Epygi - Quadro, v3.0
Grandstream - GXV-3000, v 1.0.0.24
Linksys - RT31P2, v 2.0.13
Linksys - RTP300, v 3.1.17
Linksys - WIP300, v 1.00.06
Linksys - WIP330, v 1.00
Linksys - WRTP54G, v unknown
snom - M3 Wireless phone system
UTStarcom - F3000 5.90st
ZyXEL - Prestige 2000W WiFi Phone, v WJ.00.10
Some of the above devices may have features that are not compatible with Callcentric, however the devices above can at a minimum place and receive calls.
Many other vendors hardware should be compatible. If you have questions about other hardware please contact us. |
|
|
